Standard & Oddball Sizes
In- Between Lengths
In American Standard & Metric
291 Cleveland St, Orange,  New Jersey 07050
973 674-1700  •  1 800 526-1389  •  Fax  973 674-3803

 
  UNICORP Electronic Hardware Manufacturer  

Standoffs, Spacers, Captive, Swage, Male-Female, Handles, Thumb Screws, Shoulder Screws, Insulating Washers, Jack Screws Male-Male Standoffs, Cable Ties, Plastic Circuit Board Supports & Electronic Hardware.

     Home     Search     Order     Quote     Cross     Catalog     Reps     Technical     Terms     Distributors     About Us      Contact Us

Unicorp Product Overview
Standard Sizes
 
UNICORP is a worldwide leader in manufacturing stock and custom electronic hardware, handles
 & precision fasteners used by leading companies in nearly every industry since 1971.

       

       


Standoffs- Threaded


  PART NUMBER:  (P101 thru P3008)

  DIAMETER:  1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8" / 1/2" / 5/8" / 3/4"

  SHAPE:  Hex, Round, Square

  MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Teflon®, Phenolic, 
                      Lexan®, Delrin®, Ultem®
  LENGTH:  Wide variety of lengths in 1/64" (.015) increments- up to 10"
  FINISH:  Available in 28 finishes- See Chart
  THREAD:  0-80 through 1/2- 20  /  Internal- Class UNC 2B. Thread Locking Products available.

  TOLERANCE:  Length: Up to 4" ± .005  /  From 4" to 6" ± .008  /  Over 6" ± .010

               Diameter: Standard commercial bar stock tolerances.

 

 

Spacers- Unthreaded Standoffs


  PART NUMBER:  (S101 thru S2944)

  DIAMETER:  1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8" / 1/2" / 5/8" / 3/4"

  SHAPE:  Hex, Round, Square

  MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Teflon®, Phenolic, 
                      Lexan®, Delrin®, Ultem®
  LENGTH:  Wide variety of lengths in 1/64" (.015) increments- up to 2"
  FINISH:  Available in 28 finishes-  See Chart
  INSIDE HOLE DIAMETER:  Ranging from .063  through .515  / + .010  / - .000 for screw sizes 0-80 through 1/2- 20
  TOLERANCE:  Length: Up to 2" ± .005  /  Inside Hole Diameter:  + .010  / - .000
               Diameter: Standard commercial bar stock tolerances.

 

Swage Standoffs & Swage Spacers
Threaded, Unthreaded / Clear Hole
& Rivet Type,
Swaging Tools (Punch & Anvil)


 

  PART NUMBER:  (SS100 thru SS628- Threaded) (SU101 thru SU481- Unthreaded)
                               (UP1 thru UP5 Punch) (AN100 thru AN630 Anvil)
  DIAMETER:  1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8"
  SHAPE:  Round, Hex
  MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel
  BODY LENGTH:  Wide variety of lengths- 1/32" (.031) increments up to 1"
  SHANK LENGTH:  Wide variety of lengths ranging from .062 through .295
  FINISH:  Available in 28 finishes- See Chart
  THREAD:  0-80 through 10-32 / Internal Thread- Class UNC 2B
  INSIDE HOLE DIAMETER:  Ranging from .063 through .194 for screw sizes 0-80 through 10-32
  TOLERANCE:  Body Length:  ± .005 /  Shank Length:  ± .003  / Inside Hole Diameter:  + .000  - .003
              Diameter: Standard commercial bar stock tolerances.

 

Male-Female Standoffs
Internal & External Threads


 

  PART NUMBER:  (1101 thru 1948)
  DIAMETER:  1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8" / 1/2"
  SHAPE:  Round, Square, Hex
  MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Delrin®
  LENGTH:  Wide variety of lengths in 1/32" (.031) increments- up to 9"
  FINISH:  Available in 26 finishes- See Chart
  THREAD:  0-80 through 1/2- 20 / Thread Locking Products available.  Internal Thread- Class UNC 2B / 
                  External Thread- Class UNC 2A.  Internal thread depth will be adjusted where body dimensions
                  will not permit full thread depth.
  TOLERANCE:  Length: Up to 4" ± .005 /  From 4" to 6" ± .008 / Over 6" ± .010. No Undercut on Nylon or Delrin®
                  Diameter: Standard commercial bar stock tolerances.

 

Hex Jack Screws Standoffs
Internal & External Threads


  PART NUMBER:  (JAX101 thru JAX110)
  DIAMETER:  3/16"
  SHAPE:  Hex
  MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel
  BODY LENGTH:  3/16" (.187)
  EXTERNAL THREAD LENGTH:  Ranging from .187 through .750 / Thread Locking Products available.
  FINISH:  Available in 26 finishes- See Chart
  THREAD:  4-40 Internal Thread- Class UNC 2B /  4-40 External Thread- Class UNC 2A. 
              Thread Locking Products available.
  TOLERANCE:  Body Length:  ± .005 /  External Thread Length ± .015
              Diameter: Standard commercial bar stock tolerances.
              All Jackscrews are shipped unassembled with 2- #4 flat washers, 1- #4 lock washer and 1- 4-40 nut.

 

Male-Male Standoffs- External Threads


  PART NUMBER:  (MM1101 thru MM2026)
  DIAMETER:  1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8" / 1/2"
  SHAPE:  Round, Square, Hex
  MATERIAL: Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Delrin®
  BODY LENGTH:  Wide variety of lengths- 1/64" (.015) increments- up to 6"
  EXTERNAL THREAD LENGTH:  Ranging from .125 through .625 depending on the thread size.
               Thread Locking Products available.
  FINISH:  Available in 26 finishes- See Chart
  THREAD:  2-56 through 1/4- 28 /  External- Class UNC 2A /  Thread Locking Products available.
  TOLERANCE for Brass, Aluminum, Stainless Steel and Carbon Steel:  Body Length: Up to 6" ± .005 /
         Over 6" ± .010 /  External Thread Length Tolerance is ± .005.
         External Thread Length Tolerance is ± .005
  TOLERANCE for Nylon and Delrin®:  Body Length: For all lengths the Tolerance is ± .010 / 
         External Thread Length Tolerance is ± .010
         Diameter: Standard commercial bar stock tolerances. No Undercut on Nylon or Delrin®.

 

Captive Panel Hardware
Screws, Retainers, Retaining Washers,
Springs & Decorative Panel Washers


     

  PART NUMBER:  (4001 thru 4510) (40R01 thru 46R15) (RN1 thru RN8) (RS1 thru RS8)
                               (SP1 and SP2) (PW431 thru PW435)
  DIAMETER: .132 through .750
  SHAPE:  Round, Hex.  Hex head cannot be knurled. Hex head only available for 4000 and 4100 series.
  MATERIAL:  Stainless Steel, Carbon Steel, Aluminum, Brass (Also available in Nylon For Retainer Washers Only)
  KNURL:  Straight
  HEAD:  Knurled and Slotted
  CONFIGURATION:  Round Head Screws: Knurled / Slotted- Knurled / Unslotted.
             Hex Head Screws: Slotted & Unslotted.
  LENGTH:   Wide variety of lengths in 1/16" (.061) up to 2"
  LENGTH (for retainers):   Wide variety of lengths in 1/4" through 5/8"
  RETAINER:  Standard and Spring Loaded, .050 through .290 shank length
  FINISH:  Available in 24 finishes- See Chart
  THREAD:  2-56 through 5/16-24 /  Internal Thread- Class UNC 2B / External Thread- Class UNC 2A / 
               Thread Locking Products available.
  TOLERANCE:  See chart on each part number page
                Diameter: Standard commercial bar stock tolerances.

 

Insulating Washers 
Non- Metallic, Shoulder & Flat


  PART NUMBER:  (WS1001 thru WS1970) (WF3001 thru WF3849)
  DIAMETER:  1/8"through 1"
  SHAPE:  Round
  MATERIAL:   Nylon, Teflon®, Lexan®, Ultem®, Delrin®, Phenolic
  LENGTH:  For Head Thickness: wide variety of lengths in 1/64" (.015) through .120
  FLAT WASHER THICKNESS:  .016 through .156
  INSIDE HOLE DIAMETER:  Ranging from .055 through .377 for screw sizes 0-80 through 3/8-24.  
               Reamed to + .010 / - .000, conforming to screw tolerances
  SHANK LENGTH:  Wide variety of lengths .015 through .490
  SHANK DIAMETER:  Machined to + .000  / - .005 assuring precision fit to mating hole
  EDGE:  Chamfered to permit smooth entry.
  FINISH: Colored material available upon request 
  TOLERANCE:   Inside hole diameter + .010 / - .000 - All other tolerances ± .005
         Diameter: Standard commercial bar stock tolerances. Shoulder Washers, Flat Washers- Precision
           Machined, Not Molded.

 

Thumb Screws
Knurl, Shoulder, Plain, Push


    

  PART NUMBER:  (THS1001 thru THS4072)
  DIAMETER:  5/32" / 3/16" / 1/4" / 3/8" / 7/16" / 1/2"
  SHAPE:  Round
  KNURL:  Diamond (for easy grip)
  MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel
  LENGTH:  Wide variety of lengths in 3/16" up to 2.500"
  FINISH:  Available in 20 finishes- See Chart
  THREAD:  2 -56 through 1/4-28 /  External Thread- Class UNC 2A / Thread Locking Products available.
  TOLERANCE:  See chart on each part number page. Diameter: Standard commercial bar stock tolerances.

 

Thumb Nuts
Round with Knurl / Hex with No Knurl


      

  PART NUMBER:  (THN5001 thru THN5009 / THN5010 thru THN5018)
  DIAMETER:  1/4" / 5/16" / 3/8" / 7/16" / 1/2" / 9/16" / 5/8" / 3/4"
  SHAPE:  Round, Hex
  KNURL:   Straight (for easy grip)
  MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel
  LENGTH:  Wide variety of lengths in 1/4" up to 15/32"
  FINISH:  Available in 20 finishes-  See Chart
  THREAD:   2- 56 through 3/8-16 / Internal Thread- Class UNC 2B

  TOLERANCE:  See chart on each part number page. Diameter: Standard commercial bar stock tolerances.

 

Handles & Ferrules
Pull, Offset Pull, Slanted Pull, Pulls, Folding, Bar, Fixed, Panel & Rack, Standard Pull, Internal Threaded, External Threaded,
Free Fall, All Position, Two Position, Three Position,
90 Degree, 180 Degree, Ferrules.


  PART NUMBER:  (A1011 thru X1288) (ED101 thru EF160) (10-101 thru 14- 127)
  DIAMETER:  For Round: 1/8" through 1/2" /  For Oval: 9/32" x 7/16" through 5/8" x 3/8" / 
               For Rectangular: 3/16" x 1/2" through 1/4" x 1/2" /  For Aluminum Extruded - Bar: 5/16" x 1/2"
  SHAPE: Round, Oval, Rectangular, Half-Round
  STYLE:  Available in 24 different styles. Pull Handles, Offset Pull Handles, Pulls, Slanted Pull Handles,
               Folding Handles, Fixed Handles, Panel & Rack Handles, Standard Pulls, Offset Pulls, Slanted Pulls,
               Handle Ferrules, Internal Threaded Handles, External Threaded Handles, Free Fall Handles, 
               All Position Handles, Two Position Handles, Three Position Handles,
               90 Degree Handles, 180 Degree Handles.
  MATERIAL:  Brass, Aluminum, Stainless Steel, and Carbon Steel upon request.
  OVERALL HEIGHT:  Wide variety of heights in 1/2" up to  4"
  CENTER TO CENTER:  Wide variety of lengths in  3/4" up to 12"
  DECORATIVE FERRULE:  Threaded and Unthreaded
  FERRULE DIAMETER:  1/4" through 15/16"
  FINISH:  Available in 28 finishes-  See Chart.  Handles without Plating also available.
  THREAD:  2-56 through 3/8-24 /  Internal Thread- Class UNC 2B / External Thread- Class UNC 2A / 
              Thread Locking Products available.
  TOLERANCE:  See Handles Chart:  All Technical Data
              Diameter: Standard commercial bar stock tolerances.

 

  Precision Shoulder Screws
Slotted, Hex Socket Head (Broached),
Torx®, Phillips Head


  PART NUMBER:  (SCS250-1 thru SCS750-8) (SCB250-1 thru SCB750-8)
                             (SCTX250-1 thru SCTX750-6) (SCPH250-1 thru SCPH750-6)
  DIAMETER:  1/4" / 5/16" / 3/8" / 7/16" / 1/2" / 9/16" / 5/8" / 3/4"
  SHAPE:  Round
  HEAD:  Slotted, Hex Socket Head (Broached), Torx®, Phillips
  SLOT:  Width- .047 through .094 /  Depth- .062 through .109
  BROACH / Hex Socket Head:  5/64" through 1/4" across the flats
  TORX®:  T10 through T55  
  PHILLIPS:  #1 through #4
  MATERIAL:  Stocked in Type 303 non- magnetic Stainless Steel, 316 Stainless Steel, 416 Stainless Steel,
                      4140 Alloy Steel, Brass and Carbon Steel are available upon request.
  LENGTH:  Wide variety of lengths in 1/8" up to 1.500
  FINISH:  Standard Stainless Steel Shoulder Screws are not plated. Black Oxide or Passivate for
              Stainless Steel is available.  Also available in 13 finishes for Brass and Carbon Steel-
See Chart
  THREAD:  4-40 through 3/8-16 / External Thread- Class UNC 2A / Thread Locking Products available.
  TOLERANCE:  Head Thickness and Thread Length ± .005 / Shoulder Width + .000 - .001 /  Length ± .005
                Diameter: Standard commercial bar stock tolerances.

 


Cable Ties- (Tie Wraps)

  PART NUMBER:  (UN4-18 thru UN16-120-MH)
  MATERIAL: Nylon 6/6,  Nylon 6/6- UV Stabilized, Nylon 6/6- UV Stabilized / Heat Stabilized, Tefzel®
                   and Halar®.  One piece construction.
  STYLE:  Available in 5 different styles: Cable Ties, Identification Ties, Releasable Ties, Beaded Ties,
               Mounted Head Cable Ties
  LENGTH:  4" thru 48" 
  STRENGTH:  18 lbs. thru 250 lbs.
  COLOR:  Natural Nylon 6/6 is the standard. Also available Black Nylon 6/6 and in different colors including
                 fluorescents
See Chart.  Halar® Fluoropolymer cable ties have a distinctive maroon color, Tefzel®
                 Fluoropolymer cable ties have a distinctive aqua blue color.

 


Cable Tie Combo-Packs

  PART NUMBER:  (UNFL- 500 thru UNBL- 500)
  MATERIAL:   Nylon 6/6, Natural Nylon 6/6, Black Nylon 6/6. One piece construction.
  COLOR:  Fluorescent Nylon 6/6, Natural Nylon 6/6, Black Nylon 6/6. Colors available- See Chart

 


Adhesive Back Mounting Bases

  PART NUMBER:  (UNAM- 50 thru UNAM-200)
  MATERIAL:  Natural Nylon 6/6 or Black Nylon 6/6
  OPERATING RANGE:  18 lb. though 120 lb.
  DIAMETER:  1/2" square  through  2" square
  COLOR:  Natural Nylon 6/6 is the standard color.  Available in Black Nylon 6/6.
                Unique design with Center Screw Hole which also allows for screw application along
                with adhesive application for


 



Cable Tie Tensioning Tools

                      

  PART NUMBER: (UN-100 thru UN-300)  (UN-400P & UN400M)
  MATERIAL:  Plastic and Metal
  OPERATING RANGE:  18 lb. though 175 lb.

 


Flexible Polyolefin Tubing

  PART NUMBER:  (UNP-221 thru UNP-212)
  MATERIAL:  Flexible Polyolefin Tubing
  DIAMETER:  3/64" through  2"
  COLOR:  Colors available-  See Chart
 


NAS / MS
Hardware & Fasteners

(National Aerospace Standards)
(Military Specifications)

  PART NUMBER:  (NA0201 thru NAS1415)

RoHS Compliance Statement   I   R.E.A.C.H. Statement   I   DFARS Statement
WEEE Statement   I   Conflict-Free Minerals Statement
 
Order Online                   Phone: 973-674-1700   Toll Free: 1-800-526-1389

UNICORP is a worldwide leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


UNICORP, 291 Cleveland St., Orange, New Jersey  07050 USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement