973-674-1700Standoffs, Spacers, Captive, Swage, Male Female Standoffs, Jack Screws, Male Male Standoffs, Handles, Thumb Screws, Thumbscrews, Shoulder Screws, Insulating Washers, Electronic Hardware.

    Home      Search      Order      Quote      Cross      Catalog      Reps      Technical      Terms     Distributors      About Us

Metric Dowel Pins
416 Stainless Steel
Metric  •  Precision  •  Press-Fit  •  Hardened

• Hole is slightly smaller diameter than the dowel
• During assembly the dowel pin must be pressed with force into the hole
A Series
416 Stainless Steel  •  Metric

    • Material-  416 Stainless Steel
    • Rockwell Hardness C 36-42
    • Magnetic
    • Finish-  Passivated per ASTM A380-88
    • Press-Fit
    • Ends-  1 Side: Crown (Spherical Radius)
                  1 Side: Chamfered

    • Chamfered End-  15° +/- 2°
    • Length Tolerance-  + 0.5 mm / - 0.0 mm
    • R Tolerance-   + 0.2 mm / - 0.0 mm
    • W Tolerance-   + 0.2 mm / - 0.0 mm

2.00 mm  Dowel Pins
For Technical Information: 
Part Number Pin Diameter (D)
Nominal
Diameter Tolerance Pin Length (L) R W
MDP416-2MM-5-F09 2.00 mm + .002 mm  /  + .009 mm 5 mm 0.30 mm 0.78 mm
MDP416-2MM-6-F09 2.00 mm + .002 mm  /  + .009 mm 6 mm 0.30 mm 0.78 mm
MDP416-2MM-8-F09 2.00 mm + .002 mm  /  + .009 mm 8 mm 0.30 mm 0.78 mm
MDP416-2MM-10-F09 2.00 mm + .002 mm  /  + .009 mm 10 mm 0.30 mm 0.78 mm
MDP416-2MM-12-F09 2.00 mm + .002 mm  /  + .009 mm 12 mm 0.30 mm 0.78 mm
MDP416-2MM-14-F09 2.00 mm + .002 mm  /  + .009 mm 14 mm 0.30 mm 0.78 mm
MDP416-2MM-16-F09 2.00 mm + .002 mm  /  + .009 mm 16 mm 0.30 mm 0.78 mm
MDP416-2MM-20-F09 2.00 mm + .002 mm  /  + .009 mm 20 mm 0.30 mm 0.78 mm
MDP416-2MM-24-F09 2.00 mm + .002 mm  /  + .009 mm 24 mm 0.30 mm 0.78 mm
2.50 mm  Dowel Pins
For Technical Information: 
Part Number Pin Diameter (D)
Nominal
Diameter Tolerance Pin Length (L) R W
MDP416-2.5MM-5-F09 2.50 mm + .002 mm  /  + .009 mm 5 mm 0.40 mm 0.95 mm
MDP416-2.5MM-6-F09 2.50 mm + .002 mm  /  + .009 mm 6 mm 0.40 mm 0.95 mm
MDP416-2.5MM-8-F09 2.50 mm + .002 mm  /  + .009 mm 8 mm 0.40 mm 0.95 mm
MDP416-2.5MM-10-F09 2.50 mm + .002 mm  /  + .009 mm 10 mm 0.40 mm 0.95 mm
MDP416-2.5MM-12.5-F09 2.50 mm + .002 mm  /  + .009 mm 12.5 mm 0.40 mm 0.95 mm
MDP416-2.5MM-14-F09 2.50 mm + .002 mm  /  + .009 mm 14 mm 0.40 mm 0.95 mm
MDP416-2.5MM-16-F09 2.50 mm + .002 mm  /  + .009 mm 16 mm 0.40 mm 0.95 mm
MDP416-2.5MM-20-F09 2.50 mm + .002 mm  /  + .009 mm 20 mm 0.40 mm 0.95 mm
MDP416-2.5MM-24-F09 2.50 mm + .002 mm  /  + .009 mm 24 mm 0.40 mm 0.95 mm
3.00 mm  Dowel Pins
For Technical Information: 
Part Number Pin Diameter (D)
Nominal
Diameter Tolerance Pin Length (L) R W
MDP416-3MM-6-F09 3.00 mm + .004 mm  /  + .012 mm 6 mm 0.45 mm 1.10 mm
MDP416-3MM-8-F09 3.00 mm + .004 mm  /  + .012 mm 8 mm 0.45 mm 1.10 mm
MDP416-3MM-10-F09 3.00 mm + .004 mm  /  + .012 mm 10 mm 0.45 mm 1.10 mm
MDP416-3MM-12-F09 3.00 mm + .004 mm  /  + .012 mm 12 mm 0.45 mm 1.10 mm
MDP416-3MM-14-F09 3.00 mm + .004 mm  /  + .012 mm 14 mm 0.45 mm 1.10 mm
MDP416-3MM-16-F09 3.00 mm + .004 mm  /  + .012 mm 16 mm 0.45 mm 1.10 mm
MDP416-3MM-20-F09 3.00 mm + .004 mm  /  + .012 mm 20 mm 0.45 mm 1.10 mm
MDP416-3MM-24-F09 3.00 mm + .004 mm  /  + .012 mm 24 mm 0.45 mm 1.10 mm
4.00 mm  Dowel Pins
For Technical Information: 
Part Number Pin Diameter (D)
Nominal
Diameter Tolerance Pin Length (L) R W
MDP416-4MM-10-F09 4.00 mm + .004 mm  /  + .012 mm 10 mm 0.60 mm 1.40 mm
MDP416-4MM-12-F09 4.00 mm + .004 mm  /  + .012 mm 12 mm 0.60 mm 1.40 mm
MDP416-4MM-14-F09 4.00 mm + .004 mm  /  + .012 mm 14 mm 0.60 mm 1.40 mm
MDP416-4MM-16-F09 4.00 mm + .004 mm  /  + .012 mm 16 mm 0.60 mm 1.40 mm
MDP416-4MM-20-F09 4.00 mm + .004 mm  /  + .012 mm 20 mm 0.60 mm 1.40 mm
MDP416-4MM-24-F09 4.00 mm + .004 mm  /  + .012 mm 24 mm 0.60 mm 1.40 mm
5.00 mm  Dowel Pins
For Technical Information: 
Part Number Pin Diameter (D)
Nominal
Diameter Tolerance Pin Length (L) R W
MDP416-5MM-10-F09 5.00 mm + .004 mm  /  + .012 mm 10 mm 0.75 mm 1.70 mm
MDP416-5MM-12-F09 5.00 mm + .004 mm  /  + .012 mm 12 mm 0.75 mm 1.70 mm
MDP416-5MM-14-F09 5.00 mm + .004 mm  /  + .012 mm 14 mm 0.75 mm 1.70 mm
MDP416-5MM-16-F09 5.00 mm + .004 mm  /  + .012 mm 16 mm 0.75 mm 1.70 mm
MDP416-5MM-20-F09 5.00 mm + .004 mm  /  + .012 mm 20 mm 0.75 mm 1.70 mm
MDP416-5MM-24-F09 5.00 mm + .004 mm  /  + .012 mm 24 mm 0.75 mm 1.70 mm
6.00 mm  Dowel Pins
For Technical Information: 
Part Number Pin Diameter (D)
Nominal
Diameter Tolerance Pin Length (L) R W
MDP416-6MM-12-F09 6.00 mm + .006 mm  /  + .015 mm 12 mm 0.90 mm 2.10 mm
MDP416-6MM-16-F09 6.00 mm + .006 mm  /  + .015 mm 16 mm 0.90 mm 2.10 mm
MDP416-6MM-20-F09 6.00 mm + .006 mm  /  + .015 mm 20 mm 0.90 mm 2.10 mm
MDP416-6MM-24-F09 6.00 mm + .006 mm  /  + .015 mm 24 mm 0.90 mm 2.10 mm
MDP416-6MM-30-F09 6.00 mm + .006 mm  /  + .015 mm 30 mm 0.90 mm 2.10 mm
MDP416-6MM-40-F09 6.00 mm + .006 mm  /  + .015 mm 40 mm 0.90 mm 2.10 mm
8.00 mm  Dowel Pins
For Technical Information: 
Part Number Pin Diameter (D)
Nominal
Diameter Tolerance Pin Length (L) R W
MDP416-8MM-16-F09 8.00 mm + .006 mm  /  + .015 mm 16 mm 1.20 mm 2.50 mm
MDP416-8MM-20-F09 8.00 mm + .006 mm  /  + .015 mm 20 mm 1.20 mm 2.50 mm
MDP416-8MM-24-F09 8.00 mm + .006 mm  /  + .015 mm 24 mm 1.20 mm 2.50 mm
MDP416-8MM-30-F09 8.00 mm + .006 mm  /  + .015 mm 30 mm 1.20 mm 2.50 mm
MDP416-8MM-40-F09 8.00 mm + .006 mm  /  + .015 mm 40 mm 1.20 mm 2.50 mm
10.00 mm  Dowel Pins
For Technical Information: 
Part Number Pin Diameter (D)
Nominal
Diameter Tolerance Pin Length (L) R W
MDP416-10MM-16-F09 10.00 mm + .007 mm  /  + .018 mm 16 mm 1.50 mm 3.00 mm
MDP416-10MM-20-F09 10.00 mm + .007 mm  /  + .018 mm 20 mm 1.50 mm 3.00 mm
MDP416-10MM-24-F09 10.00 mm + .007 mm  /  + .018 mm 24 mm 1.50 mm 3.00 mm
MDP416-10MM-30-F09 10.00 mm + .007 mm  /  + .018 mm 30 mm 1.50 mm 3.00 mm
MDP416-10MM-40-F09 10.00 mm + .007 mm  /  + .018 mm 40 mm 1.50 mm 3.00 mm

Phone:  973-674-1700        Toll Free:  1-800-526-1389        Fax:  973-674-3803


UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


291 Cleveland St,  Orange,  New Jersey  07050  USA
Mailing Address:  P.O. Box 280,  Orange,  New Jersey  07051-0280  USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement
Copyright©2017, Unicorp Inc., unicorpinc.com or its affiliates