973-674-1700Standoffs, Spacers, Captive, Swage, Male Female Standoffs, Jack Screws, Male Male Standoffs, Handles, Thumb Screws, Thumbscrews, Shoulder Screws, Insulating Washers, Electronic Hardware.

   Home    Search    Order    Quote    Cross    Catalog    Reps    Technical    Terms    Distributors    About Us    Contact Us

Captive Panel Screws & Retainers
Technical / Engineering Data

 
Captive Panel Hardware        Standard e-Catalog


Material / Shape Selection

  MATERIALS

Choose & write down your
material / shape code.
Go to next step
SPECIFICATIONS

ROUND
 Available for All

HEX
Only available for 4000, 4100 series SCREWS

  Brass

M01

M03

QQ-B- 626, Comp. 22, 1/2 Hard

  Aluminum

M04

M06 QQ-A- 225A, Comp. 2, T-3

  Stainless Steel

M07

M09 ASTM-A581, ASTM-A582,
QQ-S- 763, Class 303,
Cond. A

  Carbon Steel

M10

M12 QQ-S- 633, Class 2
If hex heads are required, all measurements called out by our line
drawing under its specific series remain constant. 
The only change would be the head of the screw will not be knurled.


    RoHS Compliance Statement  I  R.E.A.C.H. Statement  I  DFARS  I  WEEE
Conflict-Free Minerals Statement  I  Harmonized Tariff Codes
 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

 
Plating Selection
Plating Available On These Materials:
Brass,  Aluminum, Stainless Steel & Carbon Steel
AVAILABLE PLATING Choose & write down your plating code.
Go to next step
PLATING AVAILABLE ON THIS MATERIAL APPLICABLE
SPECIFICATIONS

 Anodize (Sulphuric)
 Dichromate Seal, Yellow/Green

F01 Aluminum

 Mil-A- 8625F-Type 2

 Anodize (Sulphuric)
 Hot Water Seal, Clear

F02 Aluminum  Mil-A- 8625F-Type 2,
 Class 1

 Anodize (Chromic)
 Hot Water Seal, Dark Gray

F03 Aluminum  Mil-A- 8625F-Type 1

 Anodize- Black

F04 Aluminum

 Mil-A- 8625F- Black Type 2, 
 Class 2

 Anodize- Black, High Lustre

F04a Aluminum  Mil-A- 8625F- Black High Lustre
 Type 2, Class 2

 Cadmium Plate,
 Clear Chromate

F05 Brass, Carbon Steel  QQ-P- 416, Class 2, Type 2

 Cadmium Plate, Commercial

F05a Brass, Carbon Steel

 Cadmium Plate, Gold Chromate

F06 Brass, Carbon Steel

 QQ-P- 416, Class 2, Type 2

 Cadmium Plate, Olive Drab

F06a Brass, Carbon Steel

 QQ-P- 416, Type 2,
 Class 3

 Nickel Plate

F07 Brass, Carbon Steel

 QQ-N- 290A, Class 1, Grade F

 Chromium Plate (Bright)

F08 Brass, Carbon Steel  QQ-C- 320B, Class 1, Type 1

 Chromium Plate, Engineering

F08a Brass, Carbon Steel  QQ-C- 320B, Class 1,Type 2

 Chromium Plate Over Nickel Plate

F08c Brass

 Mil-QQ-C-320,
 Over-Mil-QQ-N-290

 Passivate

F09 Stainless Steel

 Mil-F- 14072E (EL) E 300

 Bright Dip

F11 Brass, Aluminum

 Iridite, Clear

F12 Aluminum  Mil-C- 5541E
 Mil-DTL- 5541F

 Iridite, Gold #14

F13 Aluminum  Mil-C- 5541E
 Mil-DTL- 5541F

 Alodine 1200

F13a Aluminum

 Black Oxide, Brass

F14 Brass

 Mil-F- 495C

 Black Oxide, Stainless Steel

F15 Stainless Steel  Mil-C- 13924A, Class 3

 No Finish
 *even if there is no finish- this code must be included in part #

F16 Brass, Aluminum
Stainless Steel
Carbon Steel

 Zinc Plate .0002 Thick, Clear Chromate

F21 Brass, Carbon Steel  ASTM-B- 633,  Type 1

 Zinc Plate .0002 Thick, Yellow/ Green
 Chromate

F21a Brass, Carbon Steel  ASTM-B- 633, Type 2, 
 (Color Chromate)

 Zinc Plate .0002 Thick, Black
 Chromate

F21b Brass, Carbon Steel  ASTM-B- 633,  Type 2, 
 (Color  Chromate)

 Zinc Plate .0002 Thick, Olive Drab

F21c Brass, Carbon Steel  ASTM-B- 633, Type 2,
 (Color Chromate)

 Alkali Caustic Etch

F26 Aluminum
 
Thread Locking Products Codes
Choose & write down your
OPTIONAL thread locking code.
Go back to
 
 THREAD LOCKING PRODUCTS
PH  NDŽ PATCH
RP  NDŽ  360° RING-PATCH
PL  NDŽ PELL-IT
MS  NDŽ MICROSPHERES
VT  NDŽ VIBRA-TITE
ST  NDŽ STRIP-THREAD
 More Info on NDŽ Thread Locking Products

Threads: UNC 2B Internal Threads  -  UNC 2A External Threads  -  Quality Control: MIL-STD-105-A
For Modified Parts or Engineering Assistance:
         Unicorp offers your firm engineering and design services for customized or
modified parts at no additional charge. Please call our Engineering Department.
UNICORP, MFR. IDENT. Code No. 04729

Phone:  973-674-1700        Toll Free:  1-800-526-1389        Fax:  973-674-3803


UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


291 Cleveland St,  Orange,  New Jersey  07050  USA
Mailing Address:  P.O. Box 280,  Orange,  New Jersey  07051-0280  USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement
CopyrightŠ2020, Unicorp Inc., unicorpinc.com or its affiliates